Product name:

B503Z Series Injection Molding Energy Saver

Product name: B503Z Series Injection Molding Energy Saver
Listing Date: 2018-05-18

Introduction

B503Z Series is for electricity saving of Injection Molding.



Share:
Solution / Solutions More
Views: 0
Published: 2018 - 06 - 14
When using our 3phase 220VAC output solar inverter, we recommend inputting 305V direct voltage.1) The quantity of each group solar panel(Q1) =305VDC/the direct voltage of each solar panel2) The power of each group solar panel(P1) =The power of each solar panel * The quantity of each group solar panel(Q1)3) Total number of solar panel groups(Q2)=The power of motor *1.5/The power of each group solar panel(P1)For example:About 5.5KW water pump, input 3PH 220VAC,each solar panel :250W, 60VDC, so how the Solar panel combination is ? 1) The quantity of each group solar panel(Q1)=305V/60V=5 pcs2) The power of each group solar panel(P1)=250W*5=1250W3) Total number of solar panel groups(Q2)=5500W*1.5/1250W=7 groupsIn this case, we need 5 pcs connected in series by 7 in...
Views: 0
Published: 2018 - 05 - 24
Causes of malfunctioning / Troubleshooting Countermeasures for errors⊙The system stores up to 20 information related to the detection of abnormalities.⊙To initialize the information of abnormalities saved, press the “” button for more than 1 second.If any other problems, please contact with the agent.
Views: 0
Published: 2018 - 05 - 22
Causes of malfunctioning / Troubleshooting Countermeasures for errors⊙The system stores up to 20 information related to the detection of abnormalities.⊙To initialize the information of abnormalities saved, press the “” button for more than 1 second.If any other problems, please contact with the agent.
Views: 0
Published: 2018 - 05 - 22
1.System Running Fault and Trouble Shooting2.Water supply Running Fault and Trouble ShootingFaultCodeFaultTypeReasonSolution   LP  Low Water Pressure 1. Abnormal sensor;2. Motor rotates in the reverse direction;3. Insufficient water inflow;4. There is air inside the pumpl Check the installation of pressure transmitter;l Check the motor’s direction of rotation is correct or not;l Check the parameter b01.01 (setting value too big);l Check the pump whether is vent outthe air inside HPHigh Water Pressure1. Abnormal sensor;2. The parameter b01.00 setting value is too smalll Check the installation of pressure transmitter;l Check the parameter b01.0...
  • Detailed
  • Performance
  • Applications
  • Related
  • Scheme

Specification

Input power range:

B503Z:

♦ Three phase 380V 50/60HZ

Output power range:

B503Z:

♦ Three phase 380V:7.5~160KW

Schematic Diagram of Control Circuit:

B503Z Series Injection Molding Energy Saver 

Electricity Saving Rate:

Take estimation of transformation payback period of a 350GMIII Oil Pump Motor 45KW for example.

According to calculation of USB 200.00 per KW, the transformation cost =45KWxUSB 200.00/KW =USB 9000.00;

Assuming this current oil pump motor works 24 hours per day, 30 days per month, the rate of load is 0.6, the electric charge is RMB1/KWH, in this way, the monthly electricity consumption approximately is as follows:

Monthly electricity consumption volume=Total power*Monthly Runtime*Rate of Load =45KW*24Hr/day*30day/month*0.6=19440KWH

Energy Saving Rate of Oil Pump Motor can reach and fluctuate at 20~60%Average can be :30%, that is,

Monthly Saved Electricity Fee: 19440KWH*30%*USB0.20/KWH=USB1166.40

Period of Investment Return =Aggregate Investment/ Monthly Saved Electricity Fee=9000.00/1166.40=7.7 months

Investment of Energy Saving Transformation shall recover the full investment cost within 8 months and make great benefits for company in this Transformation Invest Efficiency (Above is only for example, specific data depends on actual measured data of commissioning the machine shall prevail.)


 

 

 

 

 


Main Features

Open-loop vector control, V/F control

The motor control uses soft-start, without current surge

There is no high-pressure throttling energy losing

through flux control

Compact structure, easy operation

The effect of energy-saving is depended on the

varied processing working

Electricity-saving rate: 30%~60%



Applications

The injection molding machine is a dedicated plastic molding machinery, plastic thermoplastic melt by heating them to high pressure so that it quickly into the cavity , packing and cooling for a period of time forms various plastic products of shapes , the injection molding machine has more than one part of the power consumption , which electricity accounts for most of the hydraulic pump motor to reduce its power consumption is the key to the energy efficiency of the injection molding machine .


Related Products / Hot deals More
2018 - 05 - 18
Main Features:u Automatically control and constant water pressureu Setting pressure through keypad directlyu Auto control and constant pressure water supply.u Built-in PID control method can realize non-loaded shut down(sleep mode)u System auto-stop when no water supply and will auto-start when water supply recoveryu Running automatically when power on (Power on resta...
2018 - 05 - 18
Main Features:◆ Sleep Function:No water consumption pump decelerates to the lower limit and after a detection then sleep down. Until the pressure below settings, master wake up automatically.◆ Restarts After Power on:Power off during running, it restarts when power on again◆ Anti clogging Function:Just designed for single pump, the pump run REV/FWD alternate.◆ Day-Part Con...
2018 - 05 - 18
Main Control Function◆Control Mode: Sensorless Vector Control (SVC), V/F Control.◆Overload Capacity: 60s with 150% of rated current, 10s with 180% of rated current.◆Starting Torque: 150% of rated torque at 0.5Hz (SVC).◆Speed Adjusting Range: 1:100 (SVC).◆Speed Accuracy: ± 0.5% of maximum speed (SVC).◆Carrier Frequency: 0.5kHz ~15.0kHz. ◆Reference Frequency Source: keypad, analog inp...
2018 - 05 - 18
Main Features:◆ Intelligent integrated complete system ◆ System to match every need and requirement◆ Easy installation and operation◆ Free debugging, high efficiency,Outstanding reliability and long using life◆ Monitoring interface with touch screen◆ Multi-pump linkage, with large and small pumps